'The Bouncer'
from
ull
Stop Signals
|
|
'The Bouncer' |
| The Products | Ordering |
A better way to control your signals. Using readily available
radio control servos a smooth controllable motion can be achieved.
Also the pause part way through the signalman pulling off the signal and the
often seen bounce when returning to danger can be simulated.
It can also be used to control gates for level crossings and private sidings, doors on engine sheds and station buildings or any other similar movement.
Just plug the parts together, wire to a switch on your control panel, attach a link from the servo arm to your signal, and you can operate your signal far more realistically. No kits to build. No electrical knowledge required. Full details provided.
Power can be from a 12Vdc auxiliary supply or a plug-top supply of 9-12Vdc or similar. Current required will depend upon the servos used but 300mA or more should suffice.
A Set-up Box is required to set the end points and tell the system which end of travel represents danger position as different signals operate differently. It will also be possible to vary the operating parameters such as the amount of bounce and how fast the signal arm moves. This only has to be done once; the board will remember all it's settings The same Set-up Box can be used on all control boards.
The Products |
||||
| Item | Code | Price | Comment | |
The Control Board
|
FS001 |
£25.00 |
The ‘brains’ of the system. Will control up to four servos for four signal arms. |
|
Servos
New smaller size! |
FS006 |
£5.50 |
The actuator used to move the signal. |
|
Set-up Box |
FS002 |
£20.00 |
Required to set the end points of servo travel and adjust the operating parameters. |
|
Rod-stoppers |
FS004 |
£3.00 |
To connect servo arm to actuating wire. |
|
| Complete Kit |
FS005 | £65.00 | Complete kit for control of four signals, gates or whatever your imagination can come up with. | |
|
Post & Packing |
- | £3.00
£0.50 |
For first item. For each additional item. |
Sent by Royal Mail First Class to U.K.
Ask for rates to other destinations. |
To order send a letter detailing required products and a cheque made out to A.G.Witts to cover the full amount including post & packing to...
Full Stop Signals
11 Keswick Avenue
Portsmouth
PO3 5BA
4th July
New smaller servo being supplied
for the same price!
14th June
Article on The Bouncer in the July edition of British
Railway Modelling.
Further information available from: fs@copnor.enta.net
|
05 July, 2007 |
©2006 A.G.Witts trading as Full Stop Signals |
The Bouncer |